Parent Page
Wobkey Rainy 75 Wireless
| Wireless Connection |
How to switch to |
Signal Lights |
Device |
| 2.4 GHZ Dongle |
Function + Tab toggles between dongle (Green) and BT (Blue) when no USB wire is connected. |
Green Indicator under F4 Key for 3 seconds |
Vermeer - Main Desktop |
| Bluetooth F1 |
Function + Tab toggles between dongle (Green) and BT (Blue) when no USB wire is connected. Then if Not Blue under F1 press Function + F1. |
Blue Indicator under F1 Key for 3 seconds |
Picasso Red Ryzen Work PC |
| Bluetooth F2 |
Function + Tab toggles between dongle (Green) and BT (Blue) when no USB wire is connected. Then if Not Blue under F2 press Function + F2. |
Blue Indicator under F2 Key for 3 seconds |
Renior 4700g Black TV Computer |
| Bluetooth F3 |
Function + Tab toggles between dongle (Green) and BT (Blue) when no USB wire is connected. Then if Not Blue under F3 press Function + F3. |
Blue Indicator under F3 Key for 3 seconds |
ROG Ally |
Bluetooth Device Assigments
- F1 -> Veermeer - Main Desktop
- F2 -> Renior 4700g Black TV Computer
- F3 -> ROG Ally
Wireless Mode
The only way this keyboard will do anything without being plugged directly into a computer is by turning on the wireless mode.
Remove the Caps Lock Keycap to expose the wireless on/off switch. I will only use this thing in wireless mode.
Once I did this the RGB lights started doing stuff.
Switch Connection Modes
Function + Tab sitches from Wired (ESC Lights up), F1 - F3 Lights up for what bluetooth conneciton you are on, F4 lights up green to inicate we are using 2.4 GHZ dongle connection.
Bluetooth Pairing
Long Press Function Key + F1/F2/F3 for 3 seconds to assign device. I think we need to be in blue tooth mode for this to work (ie Function + Tab Lights up F1-F3 not F4)
2.4GHZ Pairing
What is this? It says we can pair to dongle by long pressing Function + F4. Seems to just work for me without needing to pair. Might be needed if switching dongles?