Parent Page

Wobkey Rainy 75 Charge

How much charge left

1. Hold down Function + Space to see how much charge you have.
2. We have RGB version so number keys 1-0 indicate how much charge you are at.
3. 1 represents 10%
4. 1-2 represents 20%
5. and so on, until 1-0 are all continuously lit, indicating 100% battery
6. When the battery is below 40%, it will display in red
7. below 80%, it will display in yellow
8. above 80%, it will display in green.

How can I tell if it is charging?

1. When USB C Charging is occurring
2. Hold down Function + Space to see RGB lighting strobe from 1 through 0
3. When charge is complete all numbers will light up solid
4. For some reason this charge indicator ONLY works if connected.

Not Connected

1. To read battery activity the keyboard MUST be connected.
2. Through BlueTooth, dongle or wired.
3. When the keyboard awakens from sleep mode it attempts to connect
4. If not connected the firmware only keeps trying to connect.
5. F4 will blink for dongle connection
6. OR F1-F3 will blink to connect over Bluetooth
7. Do not bother trying to charge or read battery level while the keyboard is not connected

Caps Lock and the wireless on off switch

1. Sometimes this keyboard locks up
2. Until I shut off/on the wireless switch
3. Then is starts pulling .8 amps
4. No it's pulling .8 amps even with switch in on postiion
5. Why is this thing so flakey?
6. I recommend keeping the caps lock button off since we need access to the on/off switch for when it locks up

Ultra Low Latency Mode

Function +H does something with low latency. RGB version: Press FN+H, and Caps Lock will rapidly flash white three times to indicate activation. Press it again, and it will flash once to indicate deactivation. Enabling the ultra-low latency mode results in the following delays: Wired: 2ms latency 2.4GHz: 3ms latency Bluetooth: Approximately 8ms latency. I never want low latency mode. It will just burn throught my battery. If I care about that in gaming I will use a cord not wireless.