v.2025-02-19
Parent Page

Baseus Docking Station

Links

Purchased from Amazon 2025-02-19 (51$)
Another Link

Specs

  1. Model No:BS-OH083
  2. Baseus Docking Station
  3. Baseus Metal Gleam Series II 10 in 1 HUB (Dual Display)
  4. Dual Monitor
  5. 2 HDMI Single 4K@120Hz, Dual 4K@ 60Hz
  6. 10Gbps USB C and USB A
  7. Gigabit Ethernet
  8. PD 100W
After purchasing realized I needed 100w power brick for this to work. I had a 65 watt power brick and that one gave dell errors on boot saying not enough wattage. However o nce I hooked up to C1 port on Anker Prime Charger it works fine.

USB Power Delivery (PD) specifications

  1. 3.1 can do up to 240 watts.28V, 36V, 48V. Up to 5A
  2. 3.0 can do up to 100 watts.Programmable Power Supply (PPS) with variable voltages. Up to 5A
  3. 2.0 can do up to 100 watts.5V, 9V, 12V, 15V, 20V. Up to 5A
  4. 1.0 can do up to 10 watts. Up to 2A
This means the Baseus Docking Station could be PD 2.0 or PD 3.0

Troubleshooting

Flickering Display problems on both monitors in the morning after putting laptop into sleep mode.
  1. 2025-04-02 put laptop into sleep mode and shut off charger.
  2. 2025-04-03 in Morning monitors kept resetting and going black.
  3. Monitors worked fine over hub when I disconnected USB Power from hub.
  4. Monitors also worked fine over I used the Asus Ally 65watt Type C Charger. Laptop still complained in lower right saying power was not enough.
  5. Battery report showed only 50 % Charged.
  6. My guess is when hub is getting full 100 watts power over sub type C has issues feeding dual display over HDMI.
  7. Recommend do not put into sleep mode and disconnected power to drain battery.
  8. At least fully charge up laptop battery before use.
  9. When I retried it in afternoon displays worked fine, but this was after battery was at 100% and wattage being pulled was low.