Parent Page

evtest

This works fine while in SSH and clicking stuff on controller.

evtest No device specified, trying to scan all of /dev/input/event* Not running as root, no devices may be available. Available devices: /dev/input/event0: raspberrypi-ts /dev/input/event1: soc:shutdown_button@3 /dev/input/event2: retrogame Select the device event number [0-2]: 2 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x1 product 0x1 version 0x1 Input device name: "retrogame" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 6 (KEY_5) Event code 7 (KEY_6) Event code 15 (KEY_TAB) Event code 23 (KEY_I) Event code 28 (KEY_ENTER) Event code 29 (KEY_LEFTCTRL) Event code 36 (KEY_J) Event code 37 (KEY_K) Event code 38 (KEY_L) Event code 56 (KEY_LEFTALT) Event code 57 (KEY_SPACE) Event code 103 (KEY_UP) Event code 105 (KEY_LEFT) Event code 106 (KEY_RIGHT) Event code 108 (KEY_DOWN)

Buttons

1. p1Start == Code 2
2. p2Start == Code 3
3. Red Button ==Code 29
4. Coin Door Left == Code 6
5. Coin Door Right == Code 7
6. Back Panel Button 1 == Code 28
7. Back Panel Button 2 == Code 1
8. Joystick Down on Back and Front == Code 108
9. Joystick Up on Back and Front == Code 103
10. Joystick Left == 105 on Front and Joystick Left == 106 on back.
11. Joystick Right == 106 on Front and Joystick Left == 105 on back.
12. Notice Left and right are reversed. I guess this makes sense since you are expected to look at screen while controling on back.